Water Specialist WS2H, Руководство по обслуживанию

Страница: 24 / 48

Page 24 WS2H and WS3 Drawings and Service Manual
1
3
4
DLFC not supplied.
At least one V3190-XXX
must be installed in
center hole.
Plugs may be knocked out
or drilled to use up to six
V3162-XXX.
Direction of Flow
2
5
6
B indictates BSPT
N indicates NPT
Direction of Flow
Assemblies are shipped without drain line fl ow control (DLFC). Assembly instructions:
1. Determine the desired fl ow rate. Select one V3190-XXX for the center hole and a combination of V3162-XXX to arrive at the desired fl ow rate.
At least one V3190-XXX must be used and up to six of the V3162-XXX may be used.
2. Using a drill or punch remove the desired knockout(s) in V3081.
3. Smooth holes.
4. Install appropriate size(s) of drain line
fl ow control washers. Play close attention to proper DLFC orientation.
5. Fit V3441 o-ring onto V3081 Retainer DLFC Asy and assemble. Properly orientate the V3081 in direction of fl ow.
6. Inlet threads for 1.25” female are NPT. Inlet threads for 1.5” male are NPT. Outlet threads for 1.5” are either female NPT or BSPT. 1.5” female outlet
is stamped with N or B to indicate NPT or BSPT.
Drawing
No.
Order No. Description
Quantity
V3079 V3079BSPT V3080 V3080BSPT
1 V3081 WS15 RETAINER DLFC ASY 1 1 1 1
2
V3645 WS15 DLFC FLANGE OUTLET FNPT 1 1
V3645BSPT WS15 DLFC FLANGE OUTLET FBSPT 1 1
3 V3646 WS15 DLFC FLANGE INLET MNPT 1 1
4 V3388 WS125 DLFC FLANGE INLET MNPT 1 1
5 V3652 BOLT HEXHD S/S HCS 5/16-18x3/4 4 4 4 4
6 V3441 O-RING 226 1 1 1 1
Not Shown
V3162-007 WS1 DLFC 0.7 gpm for 3/4
Install at least one V3190-XXX in center hole.
Knock out plugs allow installation of up to 6 more
of V3162-XXX.
V3162-010 WS1 DLFC 1.0 gpm for 3/4
V3162-013 WS1 DLFC 1.3 gpm for 3/4
V3162-017 WS1 DLFC 1.7 gpm for 3/4
V3162-022 WS1 DLFC 2.2 gpm for 3/4
V3162-027 WS1 DLFC 2.7 gpm for 3/4
V3162-032 WS1 DLFC 3.2 gpm for 3/4
V3162-042 WS1 DLFC 4.2 gpm for 3/4
V3162-053 WS1 DLFC 5.3 gpm for 3/4
V3162-065 WS1 DLFC 6.5 gpm for 3/4
V3162-075 WS1 DLFC 7.5 gpm for 3/4
V3162-090 WS1 DLFC 9.0 gpm for 3/4
V3162-100 WS1 DLFC 10.0 gpm for 3/4
V3190-090 WS1 DLFC 09.0 gpm for 1
V3190-100 WS1 DLFC 10.0 gpm for 1
V3190-110 WS1 DLFC 11.0 gpm for 1
V3190-130 WS1 DLFC 13.0 gpm for 1
V3190-150 WS1 DLFC 15.0 gpm for 1
V3190-170 WS1 DLFC 17.0 gpm for 1
V3190-200 WS1 DLFC 20.0 gpm for 1
V3190-250 WS1 DLFC 25.0 gpm for 1
V3079 WS DLFC ASY 125 MNPT/15 FNPT, V3079BSPT WS DLFC ASY 125 MNPT/15 FBSPT,
V3080 WS DLFC ASY 15 MNPT/15 FNPT and V3080BSPT WS DLFC ASY 15 MNPT/15 FBSPT
Washer
Radius
h