To give PoolLab 2.0 access to the cloud already created in the LabCOM app, proceed as follows:
1)
Connect PoolLab 2.0 with the LabCOM App (as shown on the previous pages)
2)
Tap the spanner next to "Connected Cloud Account
Note:
If a cloud account has not yet been created in the LabCOM app, you will be asked whether an account should be created.
Only a cloud account that has been created and is active in the LabCOM app can be transferred to PoolLab 2.0.
3) Tap on "send to PoolLab
From this point on and provided that Wifi has been set up on the PoolLab (see previous page) and the WiFi network is accessible, after pressing the WiFi icon (on
the PoolLab 2.0) the measurement data will automatically be transferred to the cloud and will thus be available in the app, the software and on the LabCOM
website.
PoolLab 2.0
(Set up Cloud)
