- 9 -
LS
The sensitivity of comparing two different images. The smaller the value is, the higher sensitivity for motion detection. The
highest sensitivity setting is 00 and the lowest sensitivity setting is 15. The default value is 07.
SS
The sensitivity regarding the size of the triggered object on the screen (the number of motion detection grids). The smaller
the value, the higher sensitivity for motion detection. The highest sensitivity setting is 00 and the lowest sensitivity setting
is 15. The default setting is 03.
TS
The sensitivity regarding how long the object gets triggered. The smaller the value, the higher motion detection sensitivity
will be. The highest sensitivity setting is 00 and the lowest sensitivity setting is 15. The default setting is 02.
RE
The value of RE is a reference for detection. The default value is 10, which means DVR will compare 10 continuous
images at one time according to the sensitivity of LS, SS, TS simultaneously. The bigger the value, the higher sensitivity
for motion detection. The highest sensitivity is 61.
Alarm
Select LOW / HIGH for the alarm. The default alarm value is OFF.
Press “ENTER” to confirm the
start area
Press
◄
or
►
to choose the
width of the area
Press
▲
or
▼
to choose the
height of the area, and press
“ENTER” again to confirm.
Multi-detection areas
Press
“
－
” to set the whole
area under detection
Press
“
＋
” to set the whole
undetected
Note:
The default setting of Spatial Sensitivity is 03, which means once a object is detected more than 3 grids, the
system will get triggered. So the value of Spatial Sensitivity must be less than the number of grids that you set up for
the motion detection area.
