Vehicle Installation Instructions
WGD00085 REV B1
Page 6
Quick Overview of Installation
1.
Gather all tools and materials
2.
Mount Radio antenna and route cable
3.
Configure and mount Radio Bullet
4.
Install external inputs/power cable
5.
Route cables for:
a.
Camera(s)
b.
Wireless Microphone
c.
Cabin Microphone
d.
Touch display
e.
Ethernet
6.
Install optional cables (GPS and Radar)
7.
Install optional switch for MDC/MDT application
8.
Mount PoE connector
9.
Mount touch display bracket
10.
Mount Wireless Microphone
11.
Connect and mount camera(s)
12.
Connect cables to DVR
13.
Insert fuse
14.
Turn on DVR and test functions (Also see
Quick Reference Guide
to test functions)
Note:
If using a Mezzanine card (additional ports) the “WIRELESS MIC 2” and “AUX MIC” ports are not
used. The firmware does not activate these ports. Instead use the Dual Mic splitter.