Vehicle Installation Instructions
WGD00085 REV B1
Page 21
Power Over Ethernet (PoE) Adapter – Orange and Brown
The assembly consists of a POE adapter which provides power from the DVR to the Bullet Radio and two
Ethernet cables that connect from the DVR to the Bullet radio. The orange wire is positive 12 volt
power and the brown wire is ground. Strip back the insulation on both wires and insert the appropriate
wires into the labeled holes on the POE adapter and tighten the screws down with a small flat or Philips
screwdriver.
[Figure 30a]
Figure 30a
PoE Ethernet Cable Connections
There are 2 Ethernet cables included in the DVR installation kit. The first Ethernet cable connects from
the DVR to the PoE Adapter (labeled “DVR” on the POE adapter). The second Ethernet cable connects
from the PoE adapter to the Bullet radio (labeled “Radio” on the POE adapter).
[Figure 31]
Warning:
Be sure to plug the Ethernet cables into the correct ports on the PoE adapter. If the
cables are plugged in backwards the Ethernet port on the DVR will be damaged!
Figure 31
