Vehicle Installation Instructions
WGD00085 REV B1
Page 22
MDC/MDT Configuration (Optional)
Note:
1 additional Ethernet cables will be needed (this should be included with the MDC
package).
PoE Switch
When the configuration of the DVR uses a MDC/ MDT (Laptop connection to DVR), a PoE Switch is
needed. The PoE switch allows additional connections to the DVR via Ethernet. Connect an Ethernet
cable (CAT5E or CAT6) from the PoE switch to the Laptop Ethernet port (RJ45). [Figure 32] In the figure
only the DVR and Wireless Radio are connected. Use any of the numbered ports for the Laptop
connection.
Figure 32
Warning:
Be sure to plug the Ethernet Cable into the correct ports on the PoE Switch. If the
cables are plugged in backwards the Ethernet port on the switch will be damaged!
Note:
If using a Docking Station, use the Ethernet port on the docking station, rather than the
Ethernet port on the laptop. See docking station manufacture manual for further instructions.
