Page - 04
1. Activation
2. Mounting
Important Tips:
No wiring needed, simply peel and stick the alarm onto any window or glass.
Installation and First Time Use
• Remove the battery insulating pull tabs at the front of the vibration sensor.
• Turn on the device through the on/off switch button.
1. Remove the plastic cover from white side of the double-sided sticker. Apply the tape to the rear side of the
alarm unit.
2. Wipe the mounting surface clean of dust and other particles that will interfere with the tape’s
adhesiveness. Cleaning alcohol or similar products are recommended.
3. Remove the plastic cover from the other side of the double-sided sticker and mount the alarm to the
window you wish to monitor.
4. Press evenly with your palm and hold in place for at least 30 seconds.
5. Your Smart Window Vibration Sensor is now ready for use.
• Open and close the window to make sure the sensor works as expected.
• Please note that the indicator light should be blinking.
• All components are for indoor use only. Do not install outdoors.
• Test the alarm periodically (every 1 - 2 months and each time you change the batteries) to ensure it is working properly.
Buzzer
On/Off
Switch
Battery
Compartment
Sync Button
Sensitivity Dial
LED Indicator
Sticker White Side
