Wassermann Dental-Maschinen WSM-2, Руководство пользователя

Страница: 8 / 12

7
Troubleshooting
Fault Cause Remedy
Ball bearing noise Faulty bearings Change bearings
Spindles slip Spindles too loose Tap spindles lightly with a hammer
Spindles can not be
undone Spindles too tight
on taper Contact Service
If the above recommendations do not solve the problem, contact your dental depot
or our service department.
8
Care and maintenance
8.1 Cleaning
Disconnect the power plug before starting any maintenance work.
The identification plate has always to be kept in easily legible condition and has
not to be removed.
Remove external dirt from time to time with some form of cold cleaner.
Use only cold cleaners to avoid damaging the paintwork or removing the lettering.
The equipment should be cleaned at regular intervals to ensure trouble-free operation.
It requires only normal cleaning (sponge, damp cloth, mild detergent) and no further
chemical additives.
You should make sure that the bores of the nuts for the brush spindle stay clean. Be
especially careful when polishing with pumice.
When undoing the nuts, remember that the left side has a right-handed thread and the
right side a left-handed thread .
8