Wassermann Dental-Maschinen WSM-2, Руководство пользователя

Страница: 5 / 12

2.2 Safety guidelines
Configuring and operating this equipment requires precise knowledge and observance
of the instructions in this user manual . The equipment is designed only for its intended
application.
WARNING :
Servicing and repairs should be carried out only by authorised specialists.
Make sure that the equipment is connected to the correct power source.
2.3 Responsibility for operation or damage
The responsibility for operating the device lies exclusively with the owner or user if said
device is incorrectly serviced, maintained or altered by persons not employed by an
authorised dealer or if the device is used in a manner contrary to its specified purpose.
The unit has to be maintained and operated in accordance with this user manual.
Wassermann Dental-Maschinen GmbH is not responsible for damage arising from the
nonobservance of these instructions.
Warranty and responsibility provisions contained in the sales and supply conditions of
Wassermann Dental-Maschinen GmbH are not extended by these instructions.
3
Application
The WSM-2 polishing motor is a well-proven, efficient and maintenance-free single-phase
AC motor (induction motor) with 2 speed options: 1500 rpm and 3000 rpm. It is fitted with
low-noise, completely maintenance-free ball bearings. Shaft ends have 9 mm standard
tapers for mounting the brush spindles.
Your polishing motor is designed for polishing dental products. The nuts on each side are
used for undoing the polishing spindle and as a form of shaft protection.
Only use the device for this type of application.
5