Wassermann Dental-Maschinen 172984, Руководство пользователя

Страница: 7 / 16

5
Start-up / Installation
Connect the power cord.
Remove the closing plugs from the connections and dosage head.
When using 2 litre material containers (included):
Fill the material container with the relevant component.
Warning: Insert the container filled with coloured silicone compound –
component B – into the colour marked entry at the back of the device. Do not
mix up! If you mix up the closings even for a short time, the device must be
disassembled and cleaned.
Very important: Do not tighten the caps of the material containers, but just fit them
loosely to ensure proper ventilation.
When using 1 kg bottles:
Remove the closings of the bottles filled with two component silicone and screw the
above mentioned metal quick closings (accessories) onto the bottles.
Warning: Screw the colour marked quick closings onto the bottles filled with
coloured silicone compound
– component B. Do not mix up! If you mix up the
closings even for a short time, the device must be disassembled and cleaned.
Insert the bottles with quick closings into the entry on the back of the device (the
bottles will be upside down).
Very important: Drill a ventilation hole using a drill or similar tool at the upper side
edge of the bottles to ensure proper ventilation.
When using 6 kg bulks:
Remove the closings from the cans filled with two component silicone and screw
the adaptor set onto the cans.
Warning: Screw the colour marked adapter onto the can filled with coloured
silicone compound
– component B. Do not mix up! If you mix up the closings
even for a short time, the device must be disassembled and cleaned.
Insert the can with quick closings into the entry on the back of the device (the can
will be upside down).
Very important: Drill a ventilation hole using a drill or similar tool at the upper side
edge of the can to ensure proper ventilation.
7