8
Wasp HC1 User Manual
1.7 Charging the Battery
Before using the terminal for the first time, you need to charge it for about 16 hours. After that,
you can charge the terminal for 4 hours to recharge the battery to full capacity. Charge the
terminal using the USB charging cable or the docking station.
CAUTION:
Turn ON the backup battery switch before charging the battery. Data you entered
may not be properly stored until the built-in backup battery has been adequately
charged.
CAUTION!
Operating the terminal for the first time without the AC adapter, and without fully
charging the backup battery may result in loss of data stored in RAM memory.
When the main battery is removed, the backup battery retains RAM data in
memory for 2 hours. Please fully charge the backup battery to avoid data loss in
RAM memory.
1.
Press and hold the release button on both sides of the USB charging cable and connect it
to the HC1 (1).
2.
Plug the AC adapter cable into the power jack of the USB charging cable (2).
3.
Plug the AC adapter cord into an electrical outlet (3).
Содержание HC1
Страница 1: ...Wasp HC1...
