50
Press:
Press:
0201
0202
106
Programming
Programming complete
•
When ’’END OF SEQUENCE’’ appears on the
third line of the display window and all
questions are answered, press EDIT DOWN.
•
Answer NO to the question ’’END PROG.
SESSION Y/N?’’ if there are more sub-
programs to be answered. Answer YES if the
sub-program is the last in the completed
program. The continue under the heading
’’Looking through the program’’.
Extract cycle
Extract cycle times
The time can be programmed in stages of 10
seconds. The longest time that can be
programmed is 41 minutes 40 seconds (2500
seconds) for high and low speed extracting.
If both extract speeds are selected, the low speed
will precede the high speed extracting.
Programming complete
•
When ’’END OF SEQUENCE’’ appears on the
third line of the display window and all
questions are answered, press EDIT DOWN.
•
Answer NO to the question ’’END PROG.
SESSION Y/N?’’ if there are more sub-
programs to be answered. Answer YES if the
sub-program is the last in the completed
program. The continue under the heading
’’Looking through the program’’.
Cooling
Pause with signal
If the question is answered with YES, the machine
will stop before the sub-program starts and a
buzzer will sound.
PROGR.MODE SELECT SEQUENCE EXTRACT
01
TIME HIGH SPEED 00 MIN. 00 SEC.
TIME LOW SPEED 00 MIN. 00 SEC.
PROGR.MODE SELECT SEQUENCE DOOL DOWN
01
PAUSE WITH BUZZER Y/N
N
SEPARATE COOL DOWN VALVE Y/N
N
RED.
NED
Number
keys
KLAR
ENTER
JA
JA
KLAR
ENTER
YES
RED.
NER
RED.
NED
or
EDIT
DOWN
or
EDIT
DOWN
105
Fig.
105
Fig.
106
