WÄRTSILÄ JOVYSTAR HP 200 kVA, Руководство по эксплуатации

Страница: 7 / 58

Wärtsilä JOVYSTAR HP 200-800kVA BAX 4640 E - 7 -
Online UPS-Type 400 kVA 500 kVA 600 kVA 800 kVA
Output
Output apparent power (cos
φ = 0,9)
400 kVA 500 kVA 600 kVA 800 kVA
Output active power (cos
φ = 1)
360 kW 450 kW 540 kW 720 kW
Rated output voltage
- Tolerance static, symmetric load
- Tolerance static, asymmetric load
-
Tolerance dynamic load (20 % → 100 % → 20 %)
- Correction time after load step
3 x 380/220 V 3 x 400/230 V 3 x 415/240 V
±1 %
±2 %
±5 %
< 20 ms
Rated output frequency
- Tolerance at free running quartz oscillator
- Tolerance at inverter-synchronization with mains 50/60 Hz
±0,001 Hz
±2 Hz
Rated output current (cos
φ = 0,9)
580 A 724 A 870 A 1060 A
Rated output current (cos
φ = 1,0)
522 A 651 A 783 A 954 A
THDU (according to IEC EN 62040-3)
- Linear load
- Non linear load
< 1 %
< 5 %
Input
Input voltage 3 x 400/230 V +15 % -20 %
Input frequency 50/60 Hz ±5 Hz
Input current (at 100 % load, without battery charging) 550 A 687 A 824 A 1099 A
Input current (at 100 % load, max. battery current) 610 A 767 A 904 A 1220A
Input power factor (at 100 % load) > 0,99
Input current THD (at 100 % load) < 3 %
Battery
Number of battery cells 300
Compensation charging voltage 680 V (2,27 V/Z)
Cut-off voltage 496 V (1,65 V/Z)
Max. battery charging current (at 100 % load) 60 A 80 A 120 A
Max. battery charging current with activated DCM
(
D ynamic c harging m ode, only at partial load)
100 A 200 A
Battery charging characteristic IU (DIN 41773)
Overload capability/Output short circuit characteristic
Overload capability inverter
>100 % to 125 % for 10 min
> 125 % to 150 % for 1 min
= 150 % for 10 s
Overload capability static bypass
150 % continuously
1000 % for 1 cycle
Short circuit characteristic (Bypass is available) Immediate transfer to the bypass
Short circuit characteristic (Bypass is not available)
1. Current limitation to 150 % for 150 ms
2. Current limitation to 125 % for another 5 s
695 A
579 A 870 A
725 A 1044 A
870 A
1390 A
1158 A
Design/Conformity
Dimensions (W x H x D) 1990 x 1920 x 990 mm 2440 x 2020 x 990 mm 3640 x 1920 x 990 mm
Weight (without battery) 1820 kg 2220 kg 2400 kg 3600 kg
Paint RAL 5026 / RAL 9006
Noise level < 60 dB
EMV-class according to IEC EN 62040-2 C3
Class of protection according to IEC EN 62040-3 VFI SS 111
International protection IP 20
Other data
Efficiency normal mode (at 100 % load) > 94,5 %
Efficiency battery mode (at 100 % load) > 96 %
Efficiency eco-mode (offline-mode) > 98 %
Max. crest factor without power reduction 3 : 1
Heat dissipation
(at 100 % load and rated input voltage)
22,0 kW 27,5 kW 33,0 kW 43,3 kW
Requirements to the installation position
Max. installation altitude without power reduction < 1000 m
Power reduction for installation altitude according to
IEC EN 62040-3
1 % every 100 m above 1000 m up to 5000 m
Required air cooling volume 3500 m³/h 4000 m³/h 4500 m³/h 7000 m³/h
UPS operating ambient temperature 0 to +40 °C
UPS storage temperature -10 to +70 °C
Battery ambient temperature
(recommended battery ambient temperature, see also
battery operating instruction) 0 to +25 °C
+20 °C
Battery storage temperature 0 to +25 °C
Relative humidity (non condensing) < 95 %