WÄRTSILÄ 46F Series, Руководство по эксплуатации продукта

Страница: 62 / 208

6.1.3 Heavy fuel oil operation (residual)
The fuel specification “HFO 2” is based on the ISO 8217:2017(E) standard and covers the fuel
categories ISO-F-RMA 10 – RMK 700. Additionally, the engine manufacturer has specified
the fuel specification “HFO 1”. This tighter specification is an alternative and by using a fuel
fulfilling this specification, longer overhaul intervals of specific engine components are
guaranteed (See the Engine Manual of a specific engine type).
Table 6-2 Residual fuel specifications
Test method reference
Limit
HFO 2
Limit
HFO 1
Unit Characteristics
- 20 ± 4 20 ± 4
mm
2
/s
b)
Kinematic viscosity bef. inj. pumps
e)
ISO 3104 700,0 700,0 mm
2
/s
b) Kinematic viscosity at 50 °C, max.
ISO 3675 or ISO 12185
991,0 /
1010,0 a)
991,0 /
1010,0 a)
kg/m 3
Density at 15 °C, max.
ISO 8217, Annex F 870 850 -
CCAI, max. f)
ISO 8754 or ISO 14596
Statutory require-
ments
%m/m
Sulphur, max.
c, g)
ISO 2719 60,0 60,0 °C
Flash point, min.
IP 570 2,00 2,00 mg/kg
Hydrogen sulfide, max.
ASTM D664 2,5 2,5 mg KOH/g
Acid number, max.
ISO 10307-2 0,10 0,10 %m/m
Total sediment aged, max.
ISO 10370 20,00 15,00 %m/m
Carbon residue, micro method, max.
ASTM D3279 14,0 8,0 %m/m
Asphaltenes, max. d)
ISO 3016 30 30 °C
Pour point (upper), max.
e)
ISO 3733 or ASTM
D6304-C
d)
0,50 0,50 %V/V
Water, max.
d)
ISO 3733 or ASTM
D6304-C d)
0,30 0,30 %V/V
Water before engine, max.
d)
ISO 6245 or LP1001 d, i)
0,150 0,050 %m/m
Ash, max.
IP 501, IP 470 or ISO
14597
450 100 mg/kg
Vanadium, max.
g)
IP 501 or IP 470 100 50 mg/kg
Sodium, max.
g)
IP 501 or IP 470 30 30 mg/kg Sodium before engine, max.
d, g)
IP 501, IP 470 or ISO
10478
60 30 mg/kg
Alu Silicon, max. d)
IP 501, IP 470 or ISO
10478
15 15 mg/kg
Alu Silicon before engine, max.
d)
IP 501 or IP 470
IP 501 or IP 470
IP 501 or IP 500 30
15
15 30
15
15 mg/kg
mg/kg
mg/kg
Used lubricating oil
h)
- Calcium, max.
- Zinc, max.
- Phosphorus, max.
6-6 DAAB605814
Wärtsilä 46F Product Guide 6. Fuel Oil System