Wartsila 31, Руководство по эксплуатации продукта

Страница: 28 / 168

ME
IMO Tier 2
AUX
IMO Tier 2
AUX
IMO Tier 2
DE
IMO Tier 2
DE
IMO Tier 2
Wärtsilä 16V31
750
610 750
610 720
590 750
610 720
590 RPM
kW/cyl
Engine speed
Cylinder output
176.7 181.9 180.9 181.4 180.4
g/kWh Fuel consumption at 50% load, MDF
35.3 35.4 34.1 35.3 34.0
kg/h Clean leak fuel quantity, MDF at 100% load
7.1 7.1 6.9 7.1 6.8
kg/h Clean leak fuel quantity, HFO at 100% load
Lubricating oil system
420 420 420 420 420
kPa Pressure before bearings, nom. (PT 201)
40 40 40 40 40
kPa Suction ability main pump, including pipe loss, max.
60 60 60 60 60
kPa Priming pressure, nom. (PT 201)
35 35 35 35 35
kPa Suction ability priming pump, including pipe loss, max.
70 70 70 70 70
°C Temperature before bearings, nom. (TE 201)
82 82 82 82 82
°C Temperature after engine, approx.
223 189 182 189 182
m³/h Pump capacity (main), engine driven
176 176 176 176 176
m³/h Pump capacity (main), stand-by
38.0 / 38.0 38.0 / 38.0 38.0 / 38.0 38.0 / 38.0 38.0 / 38.0 m³/h Priming pump capacity, 50Hz/60Hz
4.4 4.4 4.4 4.4 4.4
m³ Oil volume, wet sump, nom.
13.2 13.2 12.7 13.2 12.7
m³ Oil volume in separate system oil tank, nom.
0.45 0.45 0.45 0.45 0.45
g/kWh Oil consumption (100% load), approx.
3920 3920 3920 3920 3920 l/min Crankcase ventilation flow rate at full load
0.1 0.1 0.1 0.1 0.1 kPa Crankcase ventilation backpressure, max.
6.0...6.8 6.0...6.8 6.0...6.8 6.0...6.8 6.0...6.8 liters Oil volume in turning device
Cooling water system
High temperature cooling water system
373 + stat-
ic
373 + stat-
ic
373 + stat-
ic
373 + stat-
ic
373 + stat-
ic
kPa Pressure at engine, after pump, nom. (PT 401)
600 600 600 600 600
kPa Pressure at engine, after pump, max. (PT 401)
83 83 83 83 83
°C Temperature before cylinders, approx. (TE 401)
96 96 96 96 96 °C HT-water out from engine, nom (TE432)
150 150 150 150 150
m³/h Capacity of engine driven pump, nom.
210 210 210 210 210 kPa Pressure drop over engine, total
100 100 100 100 100
kPa Pressure drop in external system, max.
70...150 70...150 70...150 70...150 70...150 kPa Pressure from expansion tank
m³ Water volume in engine
Low temperature cooling water system
25 ... 38 25 ... 38 25 ... 38 25 ... 38 25 ... 38 °C Temperature before engine (TE 451)
150 150 150 150 150
m³/h Capacity of engine driven pump, nom.
41 41 41 41 41
kPa Pressure drop over charge air cooler (one-stage)
110 110 110 110 110
kPa Pressure drop over charge air cooler (two-stage)
115 115 115 115 115
kPa Pressure drop over oil cooler
100 100 100 100 100
kPa Pressure drop in external system, max.
3-14 Wärtsilä 31 Product Guide - a1 - 18 October 2016
Wärtsilä 31 Product Guide 3. Technical Data