8
USING THE DEHYDRATOR
Fill the trays
Open the door, slide out the trays and fill them with the required food. Do not overfill the
trays and make sure nothing sticks out at the back that can block the ventilator. Slide the trays
back in and close the door.
Start the dehydrator
Press the ON/OFF button to start the dehydration programme. All buttons will lit up
and the display alternating shows the last set time and duration. The fan and the
heating element start working. Now the drying temperature and the duration may also be
changed, if required. Press the button one more time will halt the programme.
Set the temperature
Press the TEMP button, the display flashes with the set temperature. Hold the + or -
buttons until the temperature is set to the desired value. The temperature can be set
between 25˚C to 90˚C.
Set the time
Press the TIMER button, the display flashes with the set duration. Hold the + or -
buttons until the duration is set to the desired value. The duration can be set from
30 minutes up to 72 hours.
Take out your food
Once the set duration has been reached the dehydrator will automatically stop. Open the door
and take out your trays. Be careful, the trays may still be hot. If necessary, use some oven
wants or utensils to take the trays or food out of the dehydrator.
Interrupt a dehydration
At any time you can stop a dehydration by pressing the ON/OFF button. The display
will dim and only the ON/OFF button will flash. After approximately 3 minutes, when
the heater has cooled of sufficiently, the fan will stop running.