7
PREPARING FOR FIRST USE
Unpack the dehydrator
Take the Wartmann™ dehydrator out of the box and remove all packaging materials. Position
the Wartmann™ dehydrator near an electricity connection, on a stable horizontal surface.
Make sure there is sufficient room for fresh air circulation at the back and the emission of
warm, moist, air from the front.
Place the trays
The Wartmann™ dehydrator comes with 12 stainless steel trays and a stainless steel dripping
tray. Open the door and place the 12 trays by sliding them in the guide rails on both sides.
Place the dripping tray at the bottom. Make sure that the end of the trays are clear and that
nothing is between the tray and the ventilator mesh at the back.
Connect the power cable
The Wartmann™ dehydrator comes with a detachable power cord. Plug the connector of the
power cord in the socket on the back of the Wartmann™ dehydrator. Now plug the power
plug in the wall socket. Always use an earthed power socket.
Switch the dehydrator on
The Wartmann™ dehydrator has a main power switch at the back. Press the power switch to
switch the dehydrator on. You may hear a short beep and the ON/OFF button will start
flashing.
The Wartmann™ dehydrator is now ready for use.