5
PERMANENT MOUNTED USE
The preferred mounting arrangement is to use the four (4) outer bolt holes in the
mounting plate to mount the unit to a surface. To resist the winching loads a minimum
of 1/4” (6mm) mounting plate thickness should be used. Be certain that the structure
used for mounting will resist the winching loads. When using the four (4) bolt mounting
arrangement, the winch’s wire rope may be secured back to the front shackle for
double lining.
4 - Hole Mounting
Pattern dimensions
Using the supplied M10
mounting bolts, washers, and
nuts, tighten the mounting
hardware.
