WINCH MANUAL
INTRODUCTION
2
INTRODUCTION
Congratulations on your purchase of a winch. We design and build
winches to strict specifications and with proper use and maintenance your
winch should bring you years of satisfying service.
Every effort has been made to ensure the accuracy and completeness of
the information in this manual at the time of publication, and we reserve
the right to change, alter and/or improve the product and this document
at any time without prior notice.
SAFETY DEFINITIONS
Your winch can develop tremendous pulling forces and if used unsafely
or improperly could result in property damage, serious injury or death.
Throughout this manual, you will find the following symbols for caution,
warning and danger. Pay particular attention to the notes preceded
by these symbols as they are written for your safety. Ultimately, safe
operation of this device rests with you, the operator.
DANGER
DANGER indicates a hazardous situation which,if not avoided, will
result in death or serious injury.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NOTICE
NOTICE indicates information considered important, but not hazard-
related (e.g., messages relating to property damage).
GETTING TO KNOW YOUR WINCH
Your winch is a powerful piece of machinery. It is important that you
understand the basics of its operation and specifications so that
when you need to use it, you can use it with confidence and safety.
Below is a list of the components of your winch and their uses.
1. This winch is engineered for maximum line pull with only one layer of
cable spooled onto the winch drum (the first layer).
2. Motor: The motor is powered by a 12/24-volt battery and provides
power to the gear assembly which turns the drum and winds the wire
rope in a direction.
3. Winch Drum: The winch drum is the cylinder on which the wire rope is
stored. It can be spooled In or Out by use of the remote lead switch.
4. Wire Rope: Your winch has a galvanized aircraft cable designed
specifically for load capacity of the rated line pull of this winch. The
wire rope feeds on from underneath the drum position, it is looped
at one end to accept the hook.
5. Fairlead: For when using the winch at an angle the roller fairlead acts
to guide the rope onto the drum evenly and minimizes damage to the
rope or winch from abrasion.
6. Gear Assembly System: The reduction gears convert the winch
motor power into extreme pulling forces.
7. Braking System: Braking action is automatically applied to the winch
when the winch motor is stopped or there is a load on the wire rope.
This is achieved by a separate external mechanical brake which
applies the braking action. (Brakes are NOT designed as securing
devices and the winch cables should never be left attached when
vehicle / equipment is in transport).
8. Free Spooling Clutch: The clutch allows the operator to manually
disengage (“CLUTCH OUT”) the spooling drum from the gear train.
This is called free spool. Engaging the clutch (“CLUTCH IN”) locks
the winch into the gear system.
9. Solenoid: Power from the vehicle battery flows through the
weatherproof switch before being directed to the winch motor.
10. Wired Remote lead Switch: The remote switch leads have a dual
switch for powering in or powering out your winch drum. The remote
control allows you to stand clear of the wire rope when the winch is
under load.
11. Wireless remote (Not included): This is designed and offered for
‘Offroad’ or ‘None Commercial’ use only and is not included in any
warranty offered, This allows the operator to always control the
winch from up to 50 Ft away.
12. Universal Flat Bed Mounting Channel: (Optional) Your winch could
have been optionally supplied with a flat bed mounting channel that
can be mounted to most flat surfaces such as trailers, truck beds
and structures etc. The mounting channel also has a number of
mounting holes and holes to accept your roller fairlead.
13. Pulley/Snatch Block: (Optional) If your winch is supplied with a
pulley/snatch block which can double the pulling power of the winch,
or change the pulling direction without damaging the wire rope. We
recommend you to use a double line and snatch block for pulling over
70% of the rated line pull.
