background image

WINCH MANUAL 

WARRANTY*

10

WARRANTY*

BPE Limited Ltd are the sole distributors of these WARRIOR 

WINCHES and associated brands/equipment.

BPE Limited (“seller” or BPE) warrants to the original retail buyer 

only (“Buyer”) that any mechanical component of this genuine winch 

(“product(s)”) are free of defects in material and workmanship for the 

lifetime of the winch.

The electrical components (including the motor, contactor, and switches) 

will be free of defects in material and workmanship for a period of (3) three 

years (36 Months) from the original purchase provable date of purchase

Any product BPE Limited determines to be defective will be repaired or 

replaced at our (BPE Limited) sole discretion without charge to the Buyer 

upon Buyer’s compliance with this procedure. Seller or its Authorized 

Agent may make reasonable charges for parts and(or) labour for repairs 

not covered by this Lifetime Limited Warranty. None warrantable returns 

will be charged at BPE Limited standard rates. The warranties set forth 

herein are exclusive and in lieu of all other warranties, whether oral or 

written, express or implied. 

If in the event your product becomes faulty 

within your warranty period

To obtain service or repair under this warranty, the Buyer shall mail, ship 

or otherwise deliver to the manufacturers address, at the Buyers expense; 

(1) the Product, (2) a written description of the problem, (3) Buyers name, 

address and contact number, (4) copy of the original purchase receipt or 

BPE Limited can arrange a suitable collection method (Charges apply).

Warranty Exclusions

The Warranty does not cover the cost of labour or transportation/shipping 

charges for the replacement or installation of defective part(s).
This warranty does not apply to defects of the Product caused by; 

(1) normal wear and tear, (2) failure to comply with any installation, 

maintenance or subjecting the product to loads in excess of the loads 

written/listed in the owners manual or as detailed upon the Sellers 

website, (3) alteration or modification by any parties other than the 

manufacturer, (4) misuse, abuse, neglect, accidents, Acts of God, 

terrorism or (5) failure to correctly use the item according to the owners 

manual (7) other causes beyond the control of the Seller after delivery of 

the Product to the Sellers Authorized Agent.

Other Exclusions

This Warranty does not cover steel cables, synthetic ropes, fairleads, 

wireless remotes or any exterior finishes outside thirty (30) Days from 

purchase.

BPE Limited shall not be responsible or liable for any indirect or 

consequential damages. These consequential damages may include, but 

are not limited to, lost profits or loss of use, down time or damage to other 

person(s) equipment.

BPE Limited reserves the right to change the Product design without 

notice. BPE Limited reserves the right to replace any part or whole unit 

with a newer design of the same function.

Содержание T110S12





















Отзывы: