Warren Elevating 5
th
Wheel
9
Aniline Point
165 min.
Anti-foam additives
Yes
Anti-oxidant additives
Yes
Note: This oil is recommended for normal climatic conditions within the continental United
States. Where sustained temperatures are 0 degrees F. and lower or in excess of 90+ degrees F.,
this oil should be removed and replaced with one of a viscosity rating suitable to the ambient
temperature of your region. For a suitable replacement, consult your local oil distributor or dealer.
CAUTION:
NEVER USE A DETERGENT OIL OR USED OIL IN THE HYDRAULIC
SYSTEM.
Check Tools and Supplies Required
Make sure you have the following tools on hand for installation.
•
Overhead hoist 2-ton min., and
chain with hooks.
•
Two steel saw horses
•
Acetylene torch
•
Heavy duty arc welder 300 amp.
Min.
•
Welding rods or wire
•
Power drill with various bits
•
Power hand grinder
•
Sledge hammer
•
Pipe wrenches
•
Open-end wrenches (U.S. sizes)
•
Various Allen wrenches.
•
Six large C clamps - 8 to 10 in. min.
•
Center punch
•
Chalk
•
Tape measure
•
Straight edge
•
Grease gun with suitable grease
•
Selection of fasteners including
Grade 8 bolts, 5/8 in. lock nuts and
washers
•
Black paint
