background image

Warren Elevating 5

th

 Wheel 

41 

Warranty 

 
WARREN TRUCK AND TRAILER, LLC., (hereinafter called Warren) warrants each new 
trailer, dump body and item of hydraulic equipment manufactured by it to be free from defects in 
material and workmanship under normal use and service with loads not exceeding the vehicle 
manufacturer's rated capacity for a period of 12 months after delivery to the original purchaser 
direct or by an authorized distributor. 
 

Exclusions from Warranty.

 This Warranty shall not apply to: 

 
(1) components manufactured by persons other than Warren (such as hydraulic pumps, motors, 
valve, bearings, etc.) beyond warranty, if any, which may be made by such manufacturer, 
 
(2) any unit which shall have been subject to misuse, negligence, alteration or accident or which 
shall have been repaired by anyone other than Warren or its authorized service distributor in any 
way so as in the judgment of Warren to affect adversely its performance or reliability, or 
 
(3) normal maintenance services. 
 

Purchaser's Exclusive Remedies.

 Warren's sole obligation under this warranty will be to repair 

or replace, at its option, any warranted unit or part as described above which shall be returned to 
Warren's factory or authorized service distributor and which examination shall disclose to 
Warren's satisfaction to have been defective. Freight or other transportation costs to and from the 
factory or authorized service distributor must be paid by the purchaser. Warren will not assume 
any charges for repairs made by anyone other than Warren or its authorized service distributor. 
 

Exclusion of other Warranties.

 No other warranty is made by Warren and in particular Warren 

makes NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY 
PARTICULAR PURPOSE.

 Warren neither assumes nor authorizes any person to assume for it 

any liability other than described herein. 
 

Limitations of Actions.

 Without extending the period of warranty stated above, any action for 

breach of warranty must be commenced within one year of the breached claimed or forever 
barred. 
 

Limitation of Damages.

 The purchaser's remedy stated above shall be exclusive for any and all 

claims against Warren whether based on contract, negligence, tort, or any other theory. In no 
event shall Warren be liable for any consequential damages which may result from any defect or 
failure of a unit or part. 
 

Содержание FW-30










































Отзывы: