©2011 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
4
87731A0
I N S T A L L A T I O N I N S T R U C T I O N S
1.
Remove winch mount access cover on front of vehicle
by removing four fasteners, as show, in Figure 1.
Remove left and right wheel well guards at this time.
2.
Locate mounting holes to attach front support plate
(A3) to frame as shown in Figure 2.
3.
Attach front support plate (A3) to frame, as shown
in Figure 3. Use M8 x 1.25 x 20mm hex head bolts
and 5/16” flat washers on front side and M8-1.25
nylon lock nuts on back side. Loosely secure hard-
ware using 13mm socket and wrench.
Figure 1
Figure 2
Figure 3
Remove left
and right
wheel well
guards
Remove
winch mount
access cover
