WARN® INDUSTRIES
PAGE 8
79671A2
©2011 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
VI. Rubicon Installation
The front plow mount installation is now
complete. Proceed to section VII, entitled
“Maintenance/Care”.
The previous instructions have shown how to mount the front plow mount assembly to the Honda Rincon,
either with or without winch mount installed. The early Rubicon model years have a very similar mount,
however the entire bumper assembly may need to be removed from vehicle allowing access to install the
plow mount assembly with the winch mount.
VII. Maintenance / Care
•
Inspect all metal parts on the plow, plow mount, and related hardware. Replace all parts that appears
rusted or deformed prior to use.
•
Inspect all nuts and bolts on the plow, plow mount, and related hardware prior to each use. Tighten all nuts
and bolts that appear to be loose. Stripped, fractured, or bent bolts or nuts need to be replaced
immediately.
•
Check all cables prior to use. Replace cables that are worn or frayed.
•
Check all moving and rotating parts. Remove debris that may inhibit the part from moving freely.
READ THE VEHICLE’S OPERATOR MANUAL,
WINCH OPERATOR MANUAL, AND ALL WARN-
ING LABELS PRIOR TO OPERATION OF ATV AND
WINCH.
WARNING
WARNING
PERFORM REGULAR INSPECTIONS ON THE PLOW, PLOW MOUNT, AND RELATED HARDWARE.
NEVER OPERATE THE PLOW WITH DAMAGED OR MISSING PARTS. FAILURE TO FOLLOW
THIS WARNING MAY CAUSE VEHICLE DAMAGE AND OPERATOR INJURY OR DEATH.
FAILURE TO SECURELY TIGHTEN ALL BOLTS ON
THE PLOW MOUNT, WINCH PLATE, WINCH, AND
FAIRLEAD CAN RESULT IN PRODUCT FAILURE
WHICH MAY RESULT IN VEHICLE DAMAGE AND
OPERATOR INJURY OR DEATH. DOUBLE CHECK
THAT ALL BOLTS ARE SECURELY TIGHTENED
PRIOR TO USE.
WARNING
