WARN® INDUSTRIES
PAGE 6
79671A2
©2011 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
Figure 7
Figure 8
Trim skid plate as required
Figure 9b
7.
Once mounts are secured in place, replace front
aluminum skid plate on vehicle, as shown in
Figure 7. Some trimming may be required in the
area of the plow mount to allow skid plate to bolt
up to original mounting location.
8.
See Figure 8 for completed installation. Fairlead
can now be reattached to the mounting plate.
V. Rincon Installation
(without winch
mount installed)
1.
Remove the front aluminum skid plate on the
vehicle, as shown in Figure 1 of previous section.
Save the fasteners as they will be used later to
reattach the skid plate. Figure 9b shows the
vehicle frame where the plow mount assembly
will be mounted.
IV. Rincon Installation continued
Figure 9
Install the plow mounting tabs.
1.
The plow mounting tabs supplied in this kit must
be secure to the plow in the position shown.
(Figure 9).
2.
Loosely install the M10 bolts from the plow kit.
Attach the plow to the plow mount and then
secure the plow mounting tabs. This will insure
the best fit for your vehicle.
