PG.
INSTALLATION MANUAL
13
FORD - RANGER 2019
www.warn.com
DATE: 02.27.19
SUPER BOLT INSTALLATION
37
PRESS SUPER BOLTS STUDS
PRESSURE POINTS
SUPER BOLT STUDS
ATTENTION
FOR GOOD ADHESION IT IS NECESSARY TO APPLY
AS MUCH PRESSURE AS POSSIBLE ALL OVER THE
EDGE AND CENTER OF THE SUPER BOLTS STUDS.
40-50 N/cm
2
A full surface contact between tape and substrate is decisive for good adhesion performance.
Contact is achieved by applying pressure.
In practice a pressure between 40 and 50 N/cm² is usually needed and an application temperature
between 25 and 45 °C or 77 and 113 °F is also necessary.
During application, add-on parts and tapes must have the similar temperature.
A
P
A
A
A
