©2018 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
5
102494A0
Figure 6
Figure 5
6. Using a socket, secure bolt to bumper with push nut (B2).
TIP: Use an end of a tool to hold the back side of each bolt in
place while you secure push nut.
NOTE: The head of bolt will be in the inside of bumper hull
and the push nut will be on the outside.
7. Attach fog light to brackets (A3 and A4).
NOTE: The fog
light may need to be trimmed to match the supplied fog
light bracket.
a. For LED fog lights: Secure light with two M6 flange head
bolts (B9) and M6 locking flange nuts (B6).
b. For HALOGEN fog lights: Secure with two M4
screws (B15) and M4 locking nut (B16).
NOTE: Halogen Fog light housing may need to be
trimmed to install further forward into bumper light
shroud.
NOTE: Your bracket may look different than image shows.
8. Attach fog light assemblies to bumper with two M10 flange
bolts (B8) and nuts (B7 ).
NOTE: Bracket mounting location may differ depending on
type of light.
Figure 7
