©2018 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
5
101677A0
3. Place mounting bracket (A2) behind the front frame cross
section. Align the square holes to the vehicles holes.
4. Place the winch up side down between the differential
and the bumper.
NOTE: Be sure the winch clutch is on the
passenger side of the vehicle to ensure brake operations
works correctly.
5. Attach the fairlead to your winch mount plate (A1).
6. Slide the mounting plate under the cross bar of the bumper
and over the winch.
NOTE: The two holes in the rear of the mounting plate will
align with the previously installed mounting bracket in step
3. Refer to exploded view on page 3.
I N S T A L L A T I O N I N S T R U C T I O N S
Figure 4
Figure 5
Figure 6
A2
Figure 7
