www.Warming-Trends.com | 303 346 2224 | [email protected]
26
REPLACEMENT PARTS
PBIK
Push Button Ignition Kit: spark igniter rod and wire + push button battery operated control module
PB-SI
Spark igniter rod and wire
PB-CM
Push button battery operated control module
MBR
Mounting Bracket
3VIK-NG / 3VIK-LP
3V Ignition System
3VCM
3V Control Module
3VPA-NG / 3VPA-LP
3V Pilot Assembly (pilot tube + i spark wire + igniter b wind cage)
3VGV-NG / 3VGV-LP
3V 120K BTU Capacity Gas Valve
3VBP
3V Battery Pack
24VIKHC-NG / 24VIKHC-LP
Standard 24V Ignition System (High Capacity)
24VGVHC-NG / 24VGVHC-LP
24V 400K BTU Capacity Gas Valve (High Capacity)
24VCM
24V Control Module for use with Standard Ignition Systems (HC)
24VPA-NG / 24VPA-LP
24V Pilot Assembly (pilot tube + i spark wire + igniter b wind cage) for use with Standard Ignition Systems (HC)
24VT
24 Volt Transformer for use with all 24 Volt Ignition Systems (Spark & Hot Surface Ignitions)
P24VIKSC-NG / P24VIKSC-LP
Premium 24V Ignition System (Standard Capacity)
P24VCBSC
Premium 24V 290K BTU Capacity Control Box (Standard Capacity)
P24VIKHC-NG / P24VIKHC-LP
Premium 24V Ignition System (High Capacity)
P24VCBHC
Premium 24V 512K BTU Capacity Control Box (High Capacity)
P24VIKPA-NG / P24VIKPA-LP
Premium 24V Pilot Assembly (pilot tube + i spark wire + igniter b wind cage) for use with Premium Ignition Systems (SC & HC)
P24VIKWC
Wind Cage
FLKV12
½” Flex Line and Key Valve. For use with any burner up to 120K BTU’s. Kit Includes: (1) 36” L x ½” Diameter Flex Line + ½” Key Valve + 3” and 12” Key
FLKV34
3/4” Flex Line and Key Valve. For use with any 121K - 249K BTU Burner. Kit Includes: (1) 36” L x 3/4” Diameter Flex Line + 3/4” Key Valve + 3” and 12” Key
FLKV34FIT180
3/4” Flex Line, Key Valve, and FIT180. For use with any 121K - 249K BTU Burner. Kit Includes: (1) 36” L x 3/4” Diameter Flex Line + 3/4” Key Valve + 3” and 12” Key + ½” x
2” Nipple to connect threaded inside 3/4” Flex Line Flare Connector to ½” Plate Coupling
DFLKV34
2x 3/4” Flex Lines and Key Valve. For use with any burner over 249K BTU’s. Kit Includes: (2) 36” L x 3/4” Diameter Flex Lines with + 3/4” Key Valve + 3” and 12” Key
DFLKV34FIT250
2x 3/4” Flex Lines, Key Valve, and FIT250. For use with any burner over 249K BTU’s. Kit Includes: (2) 36” L x 3/4” Diameter Flex Lines + 3/4” Key Valve + 3” and 12” Key +
(1) 3/4” x ½” MM Reducer Fitting and (1) 3/4” Tee for connection at ½” Plate Co (1) 3/4” x 3” Nipple and (1) 3/4” Tee for Key Valve connection
DFLKV34FIT300
2x 3/4” Flex Lines, Key Valve, and FIT300. For use with any 300K+ BTU Burner. Kit Includes: (2) 36” L x 3/4” Diameter Flex Lines + 3/4” Key Valve + 3” and 12” Key + (1) 3/4”
x 3” Nipple and (1) 3/4” Tee for connection at 3/4” Plate Co (1) 3/4” Tee for Key Valve connection
FIT180
Flex Line & Key Valve Connection Fitting for use with any burner over 249K BTU’s. Kit includes: (1) ½” x 2” Nipple. Connects ½” Plate Coupling to inside threaded 3/4”
Flex Line Flare Connector
FIT250
Flex Line & Key Valve Connection Fittings for 250K - 299K BTU Burner. Kit includes: (1) 3/4” x ½” MM Reducer Fitting and (1) 3/4” Tee for connection at ½” Plate
Co (1) 3/4” x 3” Nipple and (1) 3/4” Tee for Key Valve connection. Connects ½” Plate Coupling to two 3/4” Flex Lines + connection of two 3/4” Flex Lines to 3/4”
Key Valve.
FIT300
Flex Line & Key Valve Connection Fittings for 300k+ BTU Burner. Kit includes: (1) 3/4” x 3” Nipple and (1) 3/4” Tee for connection at 3/4” Plate Co (1) 3/4” x 3”
Nipple and (1) 3/4” Tee for Key Valve connection. Connects 3/4” Plate Coupling to two 3/4” Flex Lines and two 3/4” Flex Lines to 3/4” Key Valve.
FL3612
36” L x ½” Diameter Flex Line (MM)
KV12
½” Key Valve + 3” Key
KEY3
3” Key
DRIPLEG12
½” Drip Leg Kit
LPRH
Liquid Propane Regulator mounted on 5/16” 10’ Hose with handwheel quick connect. For use up to 200K BTU”s with a 20LB Propane Tank.
LPHOSE10
Liquid Propane 5/16”- 10’ Hose. For use with a 20LB Propane Tank
REGNG125
Regulator: 1/2” FNPT Inlet x ½” FNPT For use up to 125K BTU’s - Natural Gas
REGLP200
Regulator 3/8 in. NPT Female Outlet 200K BTU/hr capacity. Maximum inlet pressure 250 psi. Low pressure outlet 11 in. W.C. Liquid Propane
FPVK
Fire Pit Vent Kit: (2) 5.75” x 11.5” Vents + 18 square inches of vent area per vent
FL3634
36” L x 3/4” Diameter Flex Line (MM)
KV34
3/4” Key Valve + 3” Key
KEY24
24” Key
DRIPLEG34
3/4” Drip Leg Kit
KEY12
12” Key
P24VIKCGPA-NG/ P24VIKCGPA-LP
24 Volt Hot Surface Ignition Pilot Assembly (Dual Pilot Tubes + I Igniter B Wind Cage) for use with Hot Surface Igni-
tion Systems (Standard & High Capacity)
P24VCBSCCG
24 Volt Hot Surface Ignition 290K BTU Standard Capacity Control Box with Dual Pilot Connections
P24VCBHCCG
Premium 24 Volt 512K BTU High Capacity Control Box with Dual Pilot Connections
www.warming-trends.com/patents
PATENTED
