Warmhaus LAWA 18 Скачать руководство пользователя страница 15

15

warmhaus.com

3.  USER SECTION 

3.1.  GENERAL WARNINGS FOR USER 

3.1.1. Use of Combi

If a gas odour is present, close home entrance line and gas valves 
of your combi or close the LPG tank valve or tube valve if bulk gas 
is used. Do not switch  electricity buttons and do not do anything 

those may create sparks. Call the gas company or Authorized Service. (See 
1.3 GAS LEAKAGES, Page 6)

First start should be performed by the Warmhaus Authorized Service for 
your safety and preventing void warranty scope. Our Authorized Service 
will give you required information about use of combi after performing 
initial controls of your combi and starting for the first time.

Perform below given controls prior to starting to use:
•  Ensure that radiator/heating system, tap water and gas valves located 

under your combi are open, the radiator installation pressure is between 
1 - 1,5 bar on the manometer located under the Combi and system air is 
discharged,

•  Gas is available in your gas line (you can control by igniting one of your 

gas ovens),

•  Combi electrical fuse is open,
•  No flammable materials and products are available near to the Combi,
•  Ensure exhaust gas flue set output is not blocked,
•  If a room thermostat or control device is connected, ensure that it is in 

the ON position.

If you  shut-off the combi for a long period, perform below written 
operations:
•  Discharge the radiator installation water not containing anti-freeze,
•  Close combi electrical fuse, gas valve, radiator and tap water valves! If 

you will shut-off the combi for a short period, perform below written 
operations:

•  Do not close combi electrical fuse, gas valve, radiator and tap water 

valves!

•  Leave the Combi at Summer position and activate its Frost Protection 

function,

Shut-off the combi during maintenance and repair operations to be 
performed around exhaust gas discharge flues. After operations are 
completed, have the combi controlled by Warmhaus Authorized Service 
prior to starting the combi.

Follow below given main rules: 

•  Do not clean external frame of combi while combi is functioning and do 

not use flammable materials.

•  Do not touch the combi with wet hands or feet; also without shoes and 

with bare feet.

•  Do not unpick electricity cables.
•  In case cables are damaged, shut-off the combi and fuse switches and do 

not use the combi.

•  Electrical cables of combi and it’s accessories should only be replaced by 

the Authorized Service.

2.4. BOILER COMPONENTS

Figure 25 

Components of Combi 

1. Fan
2.  Hood Fume
3.  Burning Chamber
4.  Radiator (CH) Output Pipe
5.  Safety Thermostat
6.  Observation Glass
7. Boiler
8.  Heat Reflector
9.  Gas Inlet Pipe
10.  3 way motorized valve
11.  Low Water Pressure Switch
12.  Domestic Hot. Water Output Sensor
13.  Fan Flue Output End
14.  Expansion Tank valve
15.  Expansion Tank
16.  Radiator (CH) Return Pipe
17.  Lower Heat Reflector
18.  Expansion Tank Connection Pipe
19. Pump
20.  Exchanger with Plate
21.  3 Bars Safety Valve
22.  Gas Valve
23.  Deflector Plate
24.  Main Exchanger
25.  Burning Chamber Insulation
26.  Ignition and Ionization Electrode
27.  Diffuser Plate
28.  Automatic Air Relief Cock
29.  Control Panel
30.  Filling Tap

Содержание LAWA 18

































Отзывы: