WarmFlow GS25A, Руководство пользователя

Страница: 24 / 66

INSTALLATION INSTRUCTIONS
TR05A140.B1107 22
4.7 Electrical connections
4.7.1 General warnings
The connection to the mains power supply must be carried out by professionally qualified personnel,
registered in accordance with current legislation.
Always check to make sure that the appliance has an effective earth system. This requirement is only
satisfied if it has been properly connected to an effective earth system installed in accordance with the
requirements of current safety standards. This basic safety measure must be connected, checked and
verified by professionally qualified personnel. In case of doubt, have the electrical system checked by
a qualified electrician. The manufacturer will not be held liable for any damage or injury caused as a
result of an ineffective earth system.
■
The boiler is designed to operate with a 230 V, 50 Hz supply. The connection to the mains electricity supply must
be via a fused spur and
the appliance must be protected by a 3A fuse
. Make sure that the positions of the live
and neutral wires correspond to the wiring diagram (Figure 15);
■
Ensure the domestic power supply is checked by a qualified electrician to ensure that it can support the
maximum power absorption of the appliance, as indicated on the rating plate. In particular, make sure that the
cable sizes are adequate for the power absorbed by the appliance;
When using an electrical appliance, a few fundamental rules must be observed:
•
Do not touch the appliance with damp or wet parts of the body or when barefoot;
•
Do not pull on the electric wires;
•
Do not leave the appliance exposed to atmospheric elements (rain, sun, etc,) unless these conditions have
been expressly provided for;
•
Do not allow the appliance to be used by children or anyone unfamiliar with its operation.