![background image](http://html1.mh-extra.com/html/waring/xtreme-mx1200-series/xtreme-mx1200-series_manual_3674504004.webp)
4
MX1200 OPERATION
1. Before starting, make sure that the blender is unplugged.
2. With the unit in OFF position, place container on blender base. Be
sure container is fully seated and that drive coupling is properly
engaged. Plug blender cord into outlet.
3. Put ingredients into container and cover it. Do not fill above
MAX line.
4. This blender has variable speed controls. Set blender to desired
speed between 1 and 10.
5. The left paddle switch defaults to the VARIABLE setting in order
to use the speed adjustment option. Press right paddle switch up
to the ON position.
6. When finished blending, set
paddle switch to OFF position.
7. This blender is equipped with a
pulse option. Hold left paddle
switch in down position to engage
PULSE function. Unit will run on
max speed (30,000 RPM) until the
paddle switch is released.
8. Allow motor to come to a
complete stop before removing
container from blender base.
Never place the container on the
motor base or remove it from the motor base while
motor is running.
9. Always hold container with one hand when starting and while
blending. Never operate without jar lid.
10. Wash and dry container after each use. See Cleaning and
Sanitizing Instructions, pages 5-6.
RESETTING THERMAL PROTECTION
• Your blender is equipped with an automatic reset switch to protect
the motor from overheating.
• If your blender stops running under heavy use, turn the power switch
off and unplug the power cord. Empty the blender container of all its
contents and allow approximately 5 to 10 minutes for the motor to
cool down.
• Plug the power cord back into the outlet and continue blending.
• If your blender does not function properly following this procedure,
discontinue use and contact a certified Waring Customer Service
Center.