3
If a grounding type outlet is not available, an adapter, shown in
Figure 2, may be obtained to enable a 2-slot wall outlet to be
used with a 3-prong plug.
As shown in Figure 3, the adapter must be grounded by attaching
its grounding lug under the screw of the outlet cover plate.
CAUTION: Before using an adapter, it must be determined that
the outlet cover plate screw is properly grounded. If in doubt,
consult a licensed electrician.
Never use an adapter unless you are sure it is properly grounded.
NOTE: Use of an adapter is not permitted in Canada.
HOW TO USE YOUR
WARING
®
COMMERCIAL DRINK MIXER
Your Waring
®
Commercial Drink Mixer has its own independent
1 peak HP motor.
The drink mixer can be operated by using the PULSE button. The
PULSE button will operate only while pressed and held down.
Keep a firm grip on the cup while using PULSE. Stop mixer
when removing cup.
Your Waring
®
Commercial Drink Mixer is supplied with 1
replacable agitator. To switch agitators, remove the screw located
on the bottom of the spindle shaft, turn agitator clockwise to
remove. Insert replacement agitator and fasten retaining screw
into spindle shaft.
If the motor overheats due to excessive load, unplug the power
cord and allow the unit to cool. Reinsert power plug into wall and
continue to use.
