Assembly Manual for T-34A/B
Copyright 2008 Thomas A. Jacoby and WarbirdKits.com
13
Cut a slot in the elevator and glue the elevator horn in
place. Install the elevator pushrod.
Glue the two ply wing mount pieces together. Then
glue them into the slots in the wing mount doublers.
Reinforce the inside corners with scrap 1/4" balsa
triangle stock.
Put the wing in place on the fuselage. Make sure it’s
square by measuring from the tail to each wingtip.
Measure forward 3/4" from the wing trailing edge and
mark the wing bolt location.
