WarbirdKits T-34A Mentor, Инструкция по сборке

Страница: 7 / 16

Assembly Manual for T-34A/B
Copyright 2008 Thomas A. Jacoby and WarbirdKits.com 7
Fuselage

Glue the F11 wing saddle doublers to the fuselage
sides. Be sure to make a left side and a right side!

Glue 1/4" balsa triangle sticks to the bottom inside
edge of the fuselage sides, from the rear of the wing
saddle to the tail.
 Glue 1/8” square balsa reinforcements to F2, F3, F6
and F8 formers.

Pin F14 cockpit floor in place over the plan.

Glue F6 former to F14 cockpit floor. (Note that you are
building the fuselage upside down.)

Score the outside of the fuselage sides in line with the
aft edge of the F6 former location. Repeat at the
forward edge of the F2 former location. This will let you
pull the fuselage sides together at a later step.