Assembly Manual for T-34A/B
Copyright 2008 Thomas A. Jacoby and WarbirdKits.com
12
Glue tail blocks TB2 in place. Glue them to the
fuselage only.
Remove the stabilizer and fin.
Insert temporary 1/8”
balsa spacers to hold the blocks in place. Shape the
tail blocks as shown, and sand them flush with F10.
Put the fin back in place. Glue tail blocks TB1 to the
fuselage and tail blocks TB2 only. TB1 should hang
down 1/16” to match up with the bottom sheeting.
Remove the fin. Install a temporary 1/8” balsa spacer
between the tail blocks TB2. Shape the tail blocks as
shown.
