waratah HTH623C, Руководство оператора

Страница: 14 / 96

Safety: Maintenance Precautions
Continued on next page T7M7G6M,0000428 -19-19MAY22-1/2
General Safety
NOTE: The locking pin is retained in the carrier’s tool box.
Understand all the control levers and their functions; note
all safety devices on the harvester head and ensure they
are working properly.
Modifying, moving, or removing safety devices fitted to the
equipment could result in injury or death.
Where possible, lower all equipment to the ground; stop
the engine. Turn off power to the controller and isolate.
In the cab window, hang a “DO NOT USE” sign and, if
possible, lock the cab door.
When carrying out service and/or maintenance work,
ensure the tilt frame is in the harvesting or processing
position, and ensure the locking pin is installed.
If it is necessary to work on a raised boom or harvester
head, ensure they are supported and secured to prevent
the boom from lowering. The harvester head locking pin
must be fitted in the lock position.
Working in the “pinch” or “saw” area of the harvester
head while the hydraulic system is active could result
in injury or death. Always turn off the harvester prior to
commencing service.
Always remain on the ground or on a safe platform to
carry out repairs or maintenance. Standing on equipment
is a safety hazard, and could result in injury or death.
Do not stand under a suspended harvester head; doing
so could result in injury or death.
Attempting to alter or change the physical, mechanical,
or hydraulic operation of the harvester head during the
warranty period, without first consulting Waratah, will void
the carrier warranty.
Because of the size of some product components, always
use proper lifting procedures when removing any items.
Ensure the harvester head adjustments are correct and
the delimb arms and saw chain are sharp. Take extreme
1
XJ1297872
—UN—02JUN20
Locking Pin Location
1 — Processing position
locking pin location
care when moving around these areas. If necessary, wrap
all sharp items in a protective surface. Failure to do so
could result in personal injury.
Be aware of exposed parts such as the cylinder rods
or hoses, and, if these are damaged, replace them
immediately.
1-3-2 053122
PN=14