wantai DQ542MA, Руководство пользователя

Страница: 7 / 8

RESET signal is effective
when offline
Make RESET ineffective
Motor doesn’t run, but
maintains holding torque
Without input pulse signal Adjust PMW & signal level
Motor runs wrong direction
Wrong wires’ connection
Change connection for any of
2 wires
Wrong input direction signal Change direction setting
Motor’s holding torque is
too small
Too small relative to current
setting
Correct rated current setting
Acceleration is too fast Reduce the acceleration
Motor stalls Rule out mechanical failure
Driver does not match with
the motor
Change a suitable driver
7. Driver Wiring
A complete stepper motor control system should contain stepper drives, DC power supply
and controller (pulse source). The following is a typical system wiring diagram.