wantai DQ542MA, Руководство пользователя

Страница: 2 / 8

Overvoltage, under voltage, overcurrect, phase short circuit protection
15 channels subdivision and automatic idle-current reduction
8 channels output phase current setting
Offline command input terminal
Motor torque is related to speed, but not related to step/revolution
High start speed
High holding torque under high speed
Electrical specification:
Input voltage 18-50VDC
Input current
＜ 4A
Output current
1.0A ～ 4.2A
Consumption Consumption ： 80W ； Internal Insurance ： 6A
Temperature
Working Temperature -10 ～ 45
℃
；
Stocking temperature -40
℃
～ 70
℃
Humidity No condensation, no water droplets
gas
Prohibition of combustible gases and conductive
dust
weight 300GS
1. Pins assignments and description:
1) Connector Pins Configurations
Pin Function Details
PUL +,PUL- Pulse signal, PUL+ is the positive end of pulses input pin
PUL- is the negative end of pulse input pin
DIR+,DIR- DIR signal: DIR+ is the positive end of direction input pin
DIR- is the negative end of direction input pin
ENBL+ Enable signal: ENBL+ is the positive end of direction input pin. This signal is used for
enabling/disabling the driver. High level for enabling the driver and low level for disabling the