Installation
Print File:
If an SD Card is mounted, files can be quickly accessed here.
Position:
• Home All:
Returns Extruder and bed to home position using stop switches
• Home X / Y / Z:
Returns specific axis to home position using stop switches
• X / Y / Z Pos. Fast:
Quickly adjust the location of a specific axis
• X / Y / Z Position:
Precisely adjust the location of a specific axis
• Extr. Position:
Adjust the Extruder driving motor to feed, insert or remove filament
Extruder:
• Bed Temp:
Manually set the bed temperature 30°C and 70°C
• Temp. 1:
Manually set the Extruder temperature between 170°C and 240°C
• Extruder 1 Off:
Quickly return the Extruder temperature to 0°C
• Extr. Position:
Adjust the Extruder driving motor to feed, insert or remove filament
• Set Origin:
Returns Extruder position value to 0mm
Fan Speed:
Adjust the Extruder cooling fan to your desired percentage
SD Card:
• Print File:
Select a file to be printed from the MicroSD Card
• Mount Card:
If inserting the MicroSD Card after the 3D printer has initiated, card can be
mounted using this setting
• Unmount Card:
Safely unmount the MicroSD Card
• Delete File:
Select a file to be deleted from the MicroSD Card
Debugging:
• Echo:
Off. Echo GCODE steps to confirm what has been received
• Info:
On. Show printing information on the main display
• Errors:
On. Show errors on the main display
• Dry Run:
Off. Perform the GCODE steps without extruding any filament
AFTER SALES SUPPORT
86-571-23290996
Model : Duplicator I3 V2
24
