WANHAO Duplicator 10, Инструкция по эксплуатации

Страница: 7 / 37

CUSTOMER SUPPORT
+86-571-23290996 support@wanhao3dprinter.com Model: Duplicator 10
3D Design
Having a 3D design is the first step to creating a 3D Object.
There are a number of free 3D Designs that can be downloaded
and printed for personal use. Websits such as Thingiverse.com,
Pinshape.com and YouMagine.com are a good place to start,
but there are many more available!
INTRODUCTION
Load your Object
After slicing and preparing your file, load it onto the included
Memory Card and insert into the D10 printer.
3D Printing Process
After loading your file and pressing print, the D10 printer will
heat up the extruder and start your print. This can take some time
depending on the size of the 3D model, print speed and resolution
of each layer.
Here is an example of how size, infill, and resolution can affect printing time:
Dimensions:
Infill:
Resolution:
Print Time:
Filament Used:
62.5 x 25.75 x 67.75mm 70 x 70 x 140mm
20%
0%
2mm
2mm
53min
39min
4m 2.54m
20% 20%
2mm
1mm
6hr 40min 13hr 12min
45m 45.67m
3D Printed Object
Once the printer has completed all of the layers, you will have a 3D Printed Object. The
results are certainly worth it, with 3D models ranging from simple to complex.
6