CUSTOMER SUPPORT
+86-571-23290996
Model: Duplicator 10
Safety Instructions
Before you get started, please read these important safety instructions.
CAUTION
: This WANHAO 3D Printer generates high temperatures and includes moving parts
that can cause injury. Never reach inside of the WANHAO 3D Printer while it is in operation,
and allow time for the printer to cool down after operation.
HOT EXTRUDER
MOVING PARTS
Vapours/fumes may be irritating at operating temperatures. Always use the WANHAO
3D Printer in an open, well ventilated area.
Do not leave the WANHAO 3D Printer unattended during operation.
Contact with extruded material may cause burns. Wait for printed objects and printer to
cool before removing them from the build platform.
• Please read and understand the contents of this user manual carefully. Failure to
read the manual fully and use the printer as directed may result in injury or damange.
• The WANHAO 3D Printer is not intended for use by children without supervision or instruction
concerning the use of the appliance by a person responsible for their safety.
• Children should be under constant supervision when using the printer.
• Before installation, you should make sure that the WANHAO 3D Printer is unplugged from the
power supply.
• Only place the printer on a stable flat surface that can safely suppport the WANHAO 3D Printer.
• Ensure the mains socket / outlet is near the equipment and is easily accessible.
4
