CUSTOMER SUPPORT
+86-571-23290996
Model: Duplicator 10
PREPARING A 3D MODEL
1.
Open Cura and check you are in Expert
Mode to access all features. Click
Expert >
Switch to Full Settings.
3.
From the File menu select Load File and choose
your 3D file. Cura will automatically prepare the
file for you.
4.
Once the 3D model has finished processing,
click the Save toolpath button (disk) to save to
Memory Card (memory card must be inserted
into reader / computer).
Tip:
Just below the load / save icons Cura
provides the estimated print time and
filament used and weight for each print
6. Wait for the file to save to the Memory Card.
Once completed a save notification will appear.
8. Before removing the Memory Card / USB
Reader always select
eject
button in Cura.
20
2.
In the Basic tab, ensure Platform
Adhesion Type is set to Raft.
