W&T Microwall Gigabit 55210, Руководство пользователя

Страница: 51 / 75

51
W&T
Security & Maintenance
Subject to error and alteration
access to the management interface of the Microwall protec-
ted by the password.
IP allocation and password assignment
During initial start-up, make sure that no unauthorized access
to the Microwall occurs until the password is assigned on the
initial web page. A suitable measure is, for example, to per-
form the commissioning steps via a point-to-point connection
with the configuring computer. Only then is the Microwall
connected to the target networks.
Password
The Microwall password is the central protection against un-
authorized access to the configuration and management of
the Microwall. We recommend the use of a secure password
with a length of at least 15 characters consisting of upper and
lower case letters, numbers and special characters.
Registration for security relevant information
Devices can be registered with W&T via the inventory tool. In
case of security relevant updates and/or information you will
be informed immediately by email. In addition to the perso-
nal data provided, device-specific data is also stored during
registration.
6�1�4 Operation and configuratiuon
Individual device certificate
Access to the Web-based management can only be encrypted
via HTTPS. A self-signed default certificate is used ex works
for this purpose, for which an exception must be set up in the
browser used during commissioning. For access during ope-
ration, we recommend replacing the default certificate with an
individual certificate of your own.
Deactivation of not needed services
With the factory settings, the Microwall provides the following
incoming own services after commissioning: