W&T Microwall Gigabit 55210, Руководство пользователя

Страница: 29 / 75

29
W&T
Start-up
Subject to error and alteration
Login password (mandatory)
Assign the password for all configuration/control accesses
of the Microwall. We recommend passwords with a minimum
length of 15 characters, consisting of upper and lower case
letters, numbers and special characters. The maximum length
of the password is 51 characters. Operation without a pass-
word is not possible.
i There is no default or master password. A lost password
can only be reset to the factory settings via the emergency
access that can be activated by means of the service button
or a reset.
Network 1 (yellow)
Specify whether the connection works with a static IP address
or whether the IP parameters are obtained via DHCP.
In static operation, assign the IP parameters for the Network 1
connection (yellow).
i For operational use of the Microwall, we recommend ope-
ration with a static IP address. Especially in the Standard
Router mode, a change of IP address by the DHCP server
otherwise requires an adjustment of all static routes in the
hosts communicating via the microwall. For more informati-
on, refer to the chapter Standard Router Mode.
Network 2 (green)
Assign the IP parameters for the connection Network 2
(green). The Net-IDs of Network 1 and Network 2 must be
different.
If there are additional routers in Network 2 in remote net-
works, these can be configured later in the network settings
of the Web-based management using static routes.
Operation mode
(mandatory)
Select the desired operating mode of the Microwall. For more
information, refer to the chapter Operating Modes and Rule
Configuration.