35
Subject to error and alteration
Basic Settings
Pulse mode
By enabling Pulse mode, when the Output is switched to the
ON state it reverts automatically back to the OFF state after the
set pulse duration. When turned on again during the pulse,
the pulse duration begins to count over again. Reset allowed
means the Output may also be switched to the OFF state
during a pulse.
Date / Time
In the Date / Time area you can specify whether there is a
cyclical synchronization with a time server. In addit4ion the
date and time can be manually set. Here you can also configure
a time zone and summer/winter time changes.
Language / Info
In addition to selecting German or English, you can also
modify other display elements including the logo.
Password
Here you can specify passwords for Administrators and Users.
Please note that the same password should not be used for Admin-
istrators and Operators.
If the Administrator password has been forgotten, physical
intervention in the Web-IO is required to reset the passwords.
See section Emergency access in the appendix to this manual.
