W&T 55211, Руководство пользователя

Страница: 29 / 114

29
W&T
Start-up
Subject to error and alteration
i There is no default or master password. A lost password
can only be reset to the factory settings via the emergency
access that can be activated by means of the service button
or a reset.
Network 1 (yellow)
Specify whether the connection works with a static IP address
or whether the IP parameters are obtained via DHCP.
In static operation, assign the IP parameters for the Network 1
connection (yellow).
i For operational use of the Microwall, we recommend ope-
ration with a static IP address. Especially in the Standard
Router mode, a change of IP address by the DHCP server
otherwise requires an adjustment of all static routes in the
hosts communicating via the microwall. For more informati-
on, refer to the chapter Standard Router Mode.
Network 2 (green)
Assign the IP parameters for the connection Network 2
(green). The Net-IDs of Network 1 and Network 2 must be
different.
If there are additional routers in Network 2 in remote net-
works, these can be configured later in the network settings
of the Web-based management using static routes.
Operation mode (mandatory)
Select the desired operating mode of the Microwall. For more
information, refer to the chapter Operating Modes and Rule
Configuration.
After correct entry of all parameters, the Save button is ac-
tivated and the entries can be saved. You are automatically
redirected to the start page of the Microwall.
Configuration backup
Allows you to upload a configuration backup previously secu-
red by another Microwall. If the backup file is secured with a
password, this must be entered in the Backup Password field