W&T Electronics 57661, Руководство пользователя

Страница: 62 / 151

62
W&T
Local Port:
Unless your network administrator has informed you otherwise, the
factory default set Port 49153 may be used.
One reason for changing the factory default set local port may
be for example a fireweall which permits access only to a
particular port.
1
In any case the set local port on the Slave must be
identical to the Server Port entry for the Master.
Client HTTP Port
Specifies which HTTP port to be used for opening the control
connection to the Master box.
Unless otherwise specified, always use Port 80 here.
Binary Trigger:
Here you activate the inputs which are to set the corresponding
outputs on the Master.
i
The Web-IO Anaog-In/Out allows simultaneous access to
the inputs from various modes..
This means for example that the inputs which control the outputs
on the Master Web-IO can at the same time be read out over
HTTP.
Application Mode
Select Box2Box Slave
After all the parameters have been entered, confirm by clicking on
the
Apply button.
Now in the navigation tree select: Config >> Ports >> Port 1 >>
Output Mode