W&H MN-111, Руководство по устранению неисправностей

Страница: 20 / 22

20 MN-111 | Service book | Errors and Troubleshooting MN-111 ENG Rev08 | 2019/06/21 | © 2019 W&H Sterilization Srl
Other problems
Description Possible Cause Checks and actions
Cycle time too long Chamber overloaded See maximum load weight specified for each cycle and type of load.
Please refer to the Instructions for use.
Chamber filter obstructed Clean the chamber filter and relevant tubes
Leakage See error "100" on page 11 and "130" on page 12, all causes.
Water consumption too high Chamber overloaded See maximum load weight specified for each cycle and type of load.
Please refer to the Instructions for use.
Leakage See error "100" on page 11 and "130" on page 12, all causes.
Water pump failure Run the diagnostic cycle EVX test.
ULKA valve failure See the Test instructions service book, chapter SPECIFIC TESTS FOR
INDIVIDUAL COMPONENTS, Water pump.
Steam generator heater failure Run the diagnostic cycle S. G. Perform. Test
Noisy fan Condenser fan obstructed Check if cables or tubes obstruct the fan.