background image

DIP Switch Settings

There are two DIP switches, SW1 and SW2, on the PCB board. The settings of DIP 
switches to enable/disable optional functions are described as following;

Please remember to reset power if the DIP switch settings are changed.
For explanation of the asterisked functions, please refer to note.

Illustration of Typical Applications

IThe following examples illustrates the connection schemes when the CS-FX2 is 
applied to the FTTX solution or as an add/drop media converter.

FTTX solution:

Add/Drop media converter:

1.Point to Point Application:

2.Managed Point to Multipoint Fast Ethernet or GbE extension:

05

1. Port 7 of Half Duplex:  

SW1: 1 ON 

2. Port 7 of Full Duplex:  

SW1: 1 OFF                   (Default)

3. Port 8 of Half Duplex: 

SW1: 2 ON

4. Port 8 of Full Duplex: 

SW1: 2 OFF                   (Default)

5. Enable *SCA: 

SW1: 3 ON, SW2: 3 ON

6. Disable SCA: 

SW1: 3 ON, SW2: 3 OFF

7. Enable *Flow Control: 

SW1: 4 OFF                   (Default)

8. Disable Flow Control: 

SW1: 4 ON

9. Enable*Aging Timer: 

SW1: 5 OFF                   (Default)

10. Disable Aging Timer: 

SW1: 5 ON

11. Enable *Reserved Address Forward Filter: 

SW2: 1 ON

12. Disable Reserved Address Forward Filter:  

SW2: 1 OFF                   (Default)

13. Enable *Port Base VLAN: 

SW2: 2 ON                    

14. Disable Port Base VLAN: 

SW2: 2 OFF                   (Default)

15. Enable *Power Saving Mode: 

SW1: 3 OFF, SW2: 3 ON

16. Disable Power Saving Mode: 

SW1: 3 OFF, SW2: 3 OFF       (Default)

17. Enable *LDPS 

SW2: 4 OFF                   (Default)

18. Disable LPDS 

SW2: 4 ON

19. Enable *MLT3_DET  

SW2: 5 ON

20. Disable MLT3_DET 

SW2: 5 OFF                   (Default)     

21. Enable *Broadcast Storm Protection: 

SW2: 6 ON        

22. Disable Broadcast Storm Protection: 

SW2: 6 OFF                (Default)

23. Enable* Aggressive Back Off Mode: 

SW2: 7 OFF                   (Default)                                        

24. Disable Aggressive Back Off Mode: 

SW2: 7 ON 

25. Enable *Port 7,8 of High Priority: 

SW2: 8 ON

26. Disable Port 7,8 of High Priority: 

SW2: 8 OFF                   (Default)

27. Enable *Class of Service: 

SW2: 9 ON

28. Disable Class of Service: 

SW2: 9 OFF                   (Default)

29. Enable *Max Packet Size Option:  

SW2: 10 OFF                  (Default)

30. Disable Max Packet Size Option: 

SW2: 10 ON  

100Base-Fx Fiber

100Base-Fx Fiber

Central Office

CS-FX2

CS-FX2

*OES-224A Intelligent Switch

*CS1000

*CS1000

SNMP MANAGER

CS-FX2

CS-FX2

CS-FX2

Customer Premise Equipment

10 /100Base -T(X) Auto Sensing

10 /100Base -T(X) Auto Sensing

10 /100Base -T(X) Auto Sensing

6LAN

6LAN

6LAN

Fiber Optic Links Fast Ethernet

Fiber Optic Links Fast Ethernet

Fiber Optic Links GbE

<[email protected]

Содержание CS-FX2







Отзывы: